Now live Black Friday✓ HSA/FSA eligible² | 30-day money-backShop now
Now live Black Friday Two worlds, one sale. Wellness or Play, pick yours.✓ HSA/FSA eligible² | 30-day money-back

Hertz explained: what the numbers in sound actually mean

Written byAnastasia DeripaskaPublished Reading7 min
A steel tuning fork standing on a wooden table in warm window light, a music room blurred behind it

Read anything about sound and you will meet the same two letters: Hz. Headphones promise "20 Hz to 20 kHz". The classic vibroacoustic method talks about "30 to 120 Hz". A subwoofer box says "down to 25 Hz".

So what is hertz in sound? It is one simple idea, and it explains why bass travels, why speakers have limits, and why some sounds are felt as well as heard.

One hertz, one cycle a second

Sound is a pressure wave. Air molecules are pushed together, then pulled apart, again and again. One full push and pull is one cycle.

A hertz is simply one cycle per second. A sound at 100 Hz goes through 100 cycles every second. One at 1,000 Hz, also written 1 kHz, goes through a thousand.

Your ears turn that rate into pitch. Fast cycles sound high, like a whistle or a cymbal. Slow cycles sound low, like a tuba or the rumble of a truck.

Where hearing starts and stops

The human ear responds to pressure changes in a range of roughly 20 Hz to 20,000 Hz, according to the HyperPhysics project at Georgia State University. That is why audio gear so often quotes "20 Hz to 20 kHz".

The edges are not sharp walls. Near both ends, a tone has to be far louder before you hear it at all, as the standard equal-loudness curves show. The top of the range also usually drops as people get older. Below about 20 Hz, sound is called infrasound. Above about 20,000 Hz, it is ultrasound. Both still exist; the ear simply does not report them as tones.

Landmarks: from a piano's lowest A to a cymbal's sparkle

  • A grand piano covers 27.5 Hz to 4,186 Hz across its 88 keys. The lowest A sits just above the bottom of human hearing.
  • The deep thump of music lives in the lowest part of the range, below a few hundred hertz: bass lines, kick drums and the low notes of an organ.
  • Most of what makes speech clear sits higher up, in the hundreds and low thousands of hertz, which is why a voice still makes sense on a tiny phone speaker.
  • The sparkle of cymbals and the hiss of an "s" reach toward the top, from several thousand hertz up.

Octaves: why doubling matters

Musicians think in octaves, and so does the ear. Each time you double the frequency, you go up one octave and hear "the same note, higher". On the piano, the lowest A is 27.5 Hz. The next A up is 55 Hz, then 110 Hz, and so on. From 27.5 Hz to 4,186 Hz, the keyboard spans a little over seven octaves.

This is why audio people think in ratios, not in plain differences. The jump from 50 to 100 Hz is a full octave, a big step for the ear. The jump from 5,000 to 5,050 Hz is the same 50 hertz, but you would barely notice it.

Silhouettes of a concert crowd in front of a stage with tall stacks of loudspeakers in amber haze

Touch overlaps with the bottom of hearing

Hearing is not the only sense that picks up low sound. The skin can also detect a surface moving against it, and the range it can detect overlaps with the bottom of hearing.

In classic lab work published in the Journal of the Acoustical Society of America in 1988, researchers showed that four separate touch channels in the skin work together. Between them, in lab tests, non-hairy skin, such as the palm, could detect a touched surface moving at rates from at least 0.4 Hz to more than 500 Hz, the limits the study gives.

That overlap fits a familiar experience. At a concert, the lowest notes reach you twice: through your ears and through your chest. Vibroacoustic sessions use this overlap.

The classic definition, as a 2012 review describes it, uses low tones between 30 and 120 Hz, mixed with music, delivered through a bed, mattress or chair so they are felt as well as heard. Our guide to vibroacoustic sessions explains what happens in a session and what research has and has not shown.

Slow ripples spreading across still water at dusk

Why low numbers mean long waves

Frequency has a twin: wavelength. Sound in air travels at about 343 meters per second at room temperature. Divide that speed by the frequency and you get the length of one wave.

  • At 50 Hz, one wave is nearly 7 meters long, longer than most living rooms.
  • At 1,000 Hz, it is about 34 centimeters.
  • At 10,000 Hz, it is about 3 centimeters.

Long waves behave very differently from short ones. They bend around corners and slip through walls far more easily, which is the subject of our companion story on why bass goes through walls.

A small experiment you can try

If you have good headphones or a speaker with real bass, search for a "frequency sweep" test tone. Keep the volume low, start at the bottom, and listen as it rises. Notice where the tone first appears as a sound, and where it feels more like a flutter or pressure than a note. On many small speakers, the lowest part of the sweep simply goes silent, which tells you where that speaker's range ends.

A wide range on a spec sheet is not a quality score

When a product lists a frequency range, it is telling you the lowest and highest tones it can produce or pick up.

  • The bottom number matters for bass. Small speakers often stop well above 50 Hz. Larger speakers and subwoofers reach lower.
  • Same range, different sound. Two speakers that both claim 20 Hz to 20 kHz can sound very different. The range says nothing about how evenly or how loudly each part is produced.
  • Look for the conditions. A careful spec says how much the output drops at the edges. Without that detail, the numbers are hard to compare.

The catch

Hertz tells you about pitch, not loudness. Loudness is measured separately, in decibels. Your ears are also not equally sensitive across the range: the same physical level can sound loud in the middle and faint near the edges. So hertz tells you where a sound sits on the scale. It does not tell you how loud it is, how it feels, or whether you will hear it.

Where Woojer comes in

These numbers are the heart of what we build at Woojer. Our OSCI technology reproduces 1 to 250 Hz, the band the body reads as pressure rather than pitch, so the low end of a song reaches you through contact as well as through your ears. Here is how it works. No study cited here tested Woojer products, and Woojer is a wellness device, not a medical device.

Frequently asked questions

What is a hertz in simple terms? One cycle per second. A 100 Hz sound pushes and pulls the air 100 times every second.

What is the lowest sound a person can hear? About 20 Hz, though the edge varies between people and depends on how loud the sound is.

Can you feel sound you cannot hear? Sometimes. In lab tests, skin touching a moving surface picked up motion from about 0.4 Hz to over 500 Hz. The low end sits far below the roughly 20 Hz floor of hearing. So when very low sound shakes a floor or a seat, it can reach you through touch.

Is a higher hertz number better? No. It only means a higher pitch. A good speaker covers the whole range evenly.

What do 30 to 120 Hz mean in vibroacoustic studies? They are the low tones the classic method uses: deep enough to be felt through contact, and still within hearing.

This article is for general information only and is not medical advice. Talk to a qualified health professional about any health condition.

Sources

  1. HyperPhysics, Georgia State University. Sensitivity of human ears.
  2. HyperPhysics, Georgia State University. The piano.
  3. Bolanowski SJ, Gescheider GA, Verrillo RT, Checkosky CM. Four channels mediate the mechanical aspects of touch. Journal of the Acoustical Society of America, 1988.
  4. Punkanen M, Ala-Ruona E. Contemporary vibroacoustic therapy: perspectives on clinical practice, research, and training. Music and Medicine, 2012.
  5. HyperPhysics, Georgia State University. Speed of sound in air.
  6. HyperPhysics, Georgia State University. Equal loudness curves.